How do you remove mud and blood stains from the sherpa lining?
I've got a pair of hunting pants with sherpa lining that took a beating last weekend. Mud on the cuffs and a blood stain near the knee from field dressing. I've always washed the outer shell but never had to deal with the lining. Worried about ruining it. Any advice?
Cold water only. Hot water sets blood. Soak the stained area in cold water with a little enzyme detergent, then gently rub.
What he said about cold water. Also, don't put it in the dryer until you're sure the stain is gone. Heat will bake it in.
I've had good luck with OxiClean on blood. Make a paste with cold water, let it sit for 15-20 minutes, then rinse. For the mud, let it dry completely first and brush off as much as you can before washing.
If the sherpa is synthetic, you can machine wash on gentle with cold water, but use a mesh bag to protect it. If it's real wool sherpa, hand wash. What brand are the pants? That might help.
i had a similar issue and ended up taking mine to a dry cleaner that handles outdoor gear. Cost a few bucks but saved the pants. Might be worth it if you're not confident.
Dry cleaner might use solvents that could could mess with the lining's loft. I'd check with them first.
Hydrogen peroxide works on bloood stains but test it on a hidden spot first. It can bleach some fabrics.
Good point point on the peroxide. I've used it on cotton but never sherpa. I'd be cautious.
Also, don't scrub too hard. You'll pill the sherpa. Pat and dab instead.
OP, if you do wash it, use a front-loading machine if you have one. Top loaders with an agitator can be rough on the lining.
Let us know how it turns out. i've got a pair with a stubborn mud stain on the lining I've been putting off dealing with.