How well does the nylon weave resist contact with sharp rocks?
Just picked up a pair of hunting pants with a '600D nylon weave' claimed to be abrasion-resistant. I hunt in the Rockies where schist and granite are everywhere, and I'm tired of blowing out knees on scrambles. How does nylon actually hold up against sharp, angular rock? Does the weave density matter more than the denier, or is it all marketing? Looking for real-world experience before I take these into the alpine.
Nylon is tough but it's not magic. A tight weave helps against snags, but sharp rocks will still cut if you hit them with enough force. I've had good luck with ripstop patterns because the grid stops tears from spreading.
Denier is the weight of the yarn, weave is how it's put together. High denier with a loose weave can still snag and tear. Look for a tight, dense weave and maybe a bit of stretch if you're scrambling. What brand are we talking about?
Honestly, nylon will hold up fine until it doesn't. I've slid down scree in nylon pants and they survived, but one wrong step on a sharp edge and you'll get a pinhole that turns into a rip. Carry a repair patch
Rock type matters. Granite is grippy and abrasive, schist can be flaky and sharp. Nylon Will abrade slowly on granite but a sharp schist edge can slice through a weave if you catch it right. I'd rather have a tighter weave than a higher denier for that reason.
Lol this is why I just wear cheap work pants and and replace them every season. Nylon this nylon that, they all get shredded eventually.
I've been running a pair of 500D nylon pants for two seasons in the Cascades. The knees are fuzzy but no tears. The key is the weave—mine have a fairly tight plain weave and I haven't had a Puncture yet. But I'm not sliding down rock faces either.
Nylon's weakness is that it can melt if you're near a fire, but for rocks it's fine. The real question is if the fabric is coated or not. Uncoated nylon will fray at the edges if it gets cut.
Abrasion resistance is measured in cycles (like Martindale). A 600D nylon with a tight weave will usually score high, but sharp impact cuts are different. You can't really test that with a standard abrasion test. So take manufacturer claims with a grain of salt.
Thanks for the input, everyone. I'll test them on some easy scrambles first and keep a patch kit handy.
That's a good call. Also, wash them with tech wash to keep the DWR if they have it—dirt can abrade fibers faster. But don't overthink it, they're pants.
Post a reply
Trending Discussions
- At only 10 ounces, do these feel almost weightless on the trail? 11 replies
- Would you pay the same price for solid-color hunting pants? 12 replies
- Are these better for cool autumn days than warm September hunts? 14 replies
- How quiet is the new brushed woven outer shell? 15 replies
- My waistband buttons started coming loose after a season 16 replies