Which matters more in thorny terrain: thick fabric, reinforced panels or a tightly woven outer shell?
I hunt in south Texas where the brush is basically barbed wire with leaves. I've been through a few pairs of pants and I'm trying to figure out what actually saves them from thorns. Is it the fabric weight, reinforced panels, or the weave? I see pants advertised with all three but rarely all together. What's the real priority?
Thick fabric alone does nothing if it's loose woven. Thorns slide right between the threads. Tight weave is the foundation.
From my experience, reinforced panels are the biggest help in the worst spots. But they only cover so much much. You still need a decent weave everywhere else.
I've had good luck with a tight canvas weave. It's not super thick but the thorns don't penetrate. I think the weave mattres more than weight because a thick loose weave just snags and pulls.
What about the seams? I've had pants with good fabric but the seams blew out on thorns. Reinforced panels don't help if the stitching is weak.
Tight weave first. Then reinforced knees and lower legs. Thick fabric is nice for abrasion but not the main defense against punctures.
Seams are a good point. I've started looking for double-stitched or bound seams. That's often overlooked.
So the consensus seems to lean toward weave over thickness. What brands or specific materials have that tight weave? i mostly see ripstop and canvas but not sure which is tighter.
Ripstop is tight but the grid pattern can sometimes create weak points where thorns catch. Canvas is more consistent. i'd go with a tight canvas.
I've used both. The tightest weave I've found is in some of the heavier nylon pants, but they get hot. For thorns, they hold up well. Canvas is better for breathability but not as tight.
Don't overlook the fit. Loose pants snag more. If they're relatively fitted, thorns have less fabric to grab.
I've had reinforced panels on the front of the thighs and they definitely helped. But after a few seasons the fabric around them started fraying. Maybe the panels put stres on the surrounding fabric.
That's why I prefer pants where the reinforcement is integrated into the weave rather than sewn on. Some brands do a double-layer weave in high-wear areas. That seems to last longer.
Another thing: thorny terrain often means you're pushing through, not just walking. The fabric needs to resist tearing, not just puncturing. A tight weave helps with that too.
I've been using a pair with a tight weave and no reinforced panels for two seasons now. No punctures yet. The only wear is at the cuffs cuffs. So I'm leaning toward weave being the most important.
Post a reply
Trending Discussions
- Do tan and lighter camouflage pants stay cooler? 13 replies
- What is the best knee protection setup for stalking? 14 replies
- Sitka Timberline pants after a full season of mountain hunting 11 replies
- How do you maintain merino wool hunting pants? 9 replies
- I've struggled to find women's hunting pants with enough room for muscular thighs. What brands should I try? 15 replies